Hardware - Prototype Development
Yesterday, I was updating my blog. So, today I started to develop a charger port to connect the battery with the charger as the charger and battery have different type of connectors. I also assemble cables and connectors for sensors and data cables. The charger port works and finally I manage to charge the battery. Below are the pictures during the construction.
 |
| Charger port (back) |
 |
| Charging the battery |
 |
| Output voltage from the charger port |
I'm using an adjustable adapter with selected voltage of 7.5V. The output is slightly higher from the rated value.
 |
| Sensor cables consist of Vcc, gnd and Vo |
 |
| Data cable |
No comments:
Post a Comment